Cyclone Filter

This is a basic Vortex model consolidating a large coolant system into one unit. Simply replace a conventional medium-pressure pump with a C series pump to reduce the occupied space to 1/100th by volume. The plant space is in effect greatly expanded and production efficiency improves.

• Maximum operating pressure: 2.0MPa
• Maximum discharge: 28.8 liters/min.
• No suction filter is required.
• No clean tank is required.
• No transfer pump is required on the dirty-tank end.
• No plumbing is required to interconnect various components.

*Aqueous solution with 2% or more water-soluble coolant fluid.

A proprietary double-cyclone filtering system removes chips*. The first and second cyclones remove relatively large and fine chips, respectively. The line-filter cleaning cycle is extended by 24 times.
*Chips larger than 20μm in size removed (when using aqueous solution containing 2% or more water-soluble coolant fluid).

The C Series uses a Trochoid™ pump which excels in fluid control efficiency. The double-cyclone system sorts out chips and enables direct connection to the dirty tank.

• Compatible types of fluid
  • Aqueous solution containing 2% or more water-soluble coolant fluid
  • Not for water-insoluble coolant fluid, lubricant oil or fuel oil
  • Not for clear water, purified water, aqueous solutions without rust-preventive property, viscous fluids, corrosive liquid, solvents, and oils
• Relief valve is built into the unit.

The use of a Vortex results in huge energy savings over the conventional centrifugal pumps. The electric power cost is greatly reduced.

• Operating cycle: Unload: 20 sec. →Drill 1 Center Through: 20 sec. → Unload: 20 sec. → Drill 2 Center Through: 20 sec.
• Center Through pressure: 1.1MPa

*Calculated on the basis of operating time 8h/day, operating days 365/year, and the electric power cost ¥20/kWh.